Overall technical parameters of Pallet Push-pull Pproduct Line1. Hydraulic pusher:Pallet retention ejector, without side shift, without forks, without pallet retention function, push-out structure is scissor structure2. The load capacity is 1500KG, the loss distance is about 280mm, and the horizontal center of gravity is about 135mm (subject to the actual design)3.

Stretch Film Specifications of Portable Hand Held Film Puller:1. Hand mask2. The inner diameter of the paper core is 76mm3. Weight: 2-4kg4. Outer diameter of winding film: 140mm5. Stretch film width: 520mm (including core height, stretch film width 500mm)Portable Hand Held Film Puller requirements:1. Adjust the tension by damping pre-tension2. The weight of the film puller should be as light as possible3.

Classification of Automatic Customized Sorting And Conveyor System:Chain sorter: flip disc / flip plate / wing disc / three-dimensional flip disc / table type with belt.Steel belt sorter: It is equipped with several lateral push-out devices on the steel belt conveyor.Tape sorter: transverse push-out type/oblique tape type/oblique roller type/rotary table type/bottom turning typeRoller sorter: transverse tape type/transverse push-out typeSlide transverse push-out type: plate type/roller table typeHanging sorter: with the hanging conveyor as the main body, with the corresponding item identi

Forklift Project Of Small Packaging Edible Oil Without Pallet Stacking1. Project Name: Forklift Project Of Small Packaging Edible Oil Without Pallet Stacking2. Scope of supply: Including below machines, but is not limited;A, Two sets of conveyors (the buyer provides his own)B, Two push-pull devicesC, Two hydraulic stationsD, the forklift blocks twoE, two sets of control systemsThe specific content is designed according to the site situation and the characteristics of the equipment supplier's own equipment.3.

Operation process of Automatic Hydraulic Press Made In China For Sales: Manually use a hydraulic trailer to lift the ton bale with a pallet, push it into the limited position under the press pressure plate, and the hydraulic trailer is removed from the working position; Manually open the press, carry out tonnage bale compression, pressure delay 10-20 seconds (this parameter is adjusted according to actual needs), during the pressure delay process, manually hang the tonnage sling strap quickly to the lifting lug, and then the pressure plate automatically lifts (this process is automatic) to lif

Material Of PP packing strap for computerized strapping desktop :Polypropylene wire drawing resin has many advantages, such as true plasticity, sturdy breaking tension, bending resistance, mild precise gravity, excessive strength, desirable toughness, tender texture, non-absorbent, recyclable, clean stop surface, small put on and tear, many varieties, effortless to use and so on. It has been broadly used in a number fields.PP packing strap for automated strapping computing device simple description:1. Polypropylene (PP) is the principal uncooked material.

Detailed description of PET plastic steel strip:PET plastic steel belt, also known as plastic steel belt (PET packaging belt, polyester binding belt), is made of polyethylene terephthalate (PET) as the main raw material. At present, PET plastic steel strip is the most popular new environmental protection packaging material to replace steel strip, steel wire and PP belt packaging in the world.

Equipment technical requirements and component formulationEquipment requirements:The conveyor transfers the whole rack of wood-based panels to be packaged to the automatic baler for longitudinal "Sichuan" packagingTable height: subject to negotiation between the two partiesApplicable power supply: 380VProduction speed: 2 bundles not less than 25 torr/h Load capacity: 4000kgDevice requirementsThe strapping tightness is adjustable, PET strapping is used, and the movement is positioned at the top.The strapping speed ≥ 25 tors/hour, and the strapping pass rate ≥99%.After packing, th

Gypsum Board (Building Boards, Man-made Board, etc.) Full Automatic Six-sided Wrapping Packaging SystemGypsum board is wrapped in off-line wrapping:1. Manually add corner guards and place labels on the gypsum board, the forklift takes the board online, the vertical rocker arm wrapping, adding automatically the gypsum bar pad leg, the horizontal wrapping, and the forklift takes the board offline.2.

Features of Full Automatic Extended Corner Protection Horizontal Strapping Machine1. Steel frame structure to ensure the stable operation of the machine2. The machine head adopts the integrated design of automatic tightening, welding and cutting belt, which is fully suitable for packing belt3. The machine head can be moved close to the goods and then belted, avoiding the change of pallet size and some gaps are too large4. Automatic detection device for pallet material height. The encoder controls the precise strapping position according to different stamp heights5.

Advantages of automated warehouse1.

DESCRIPTION Of Horizontal strapping machine  :Pallet dimensions :1290 x 1290x150 mm.Load dimensions: 1200 x 1200 mm.Pallet height: Min.1049mm including pallet heightPallet weigh: 1200kg/palletConveyor height: 200mm. (chains conveyor)Strapping pattern: horizonltalProduct strapped:  Metal bucketProduction capacity :120Pallet/hour-2pcs stap in one pallet materials SOLUTION For Horizontal strapping machine :It is a strapping laptop at one head appositively deliberate to a entire automation of the packaging lines.

Technical solutions of Automatic Top Plate Cartesian Coordinate ManipulatorFigure 1 is the overall layout of the recommended two-axis handling robot solution. The main parts it contains are as follows:1. A two-axis handling robot.2. Robot base and bracket.3. Robot control system and electrical box, etc.4. Robot safety protection net, etc.The X-axis and Z-axis definitions of the robot are shown in Figure 1, and the gripper mechanism is to be designed. This plan is only a preliminary plan, which should be revised and improved after further discussion and demonstration by both parties.

Roller Conveyor Trolley (Rail-guided Vehicle) requirements:Table height: subject to negotiation between the two partiesApplicable power supply: 380VLoad capacity: 1500kgDevice Description:Rail drive motor power: 1.5kwConveying motor power: 1.1kwRoller machine effective width: 1200mm Trolley roller machine length: 1485mm (speed frequency conversion adjustable, wheel inside with rubber)Effective width of trolley: 1200mm Trolley track length: 13291mm The motor of the roller conveyor and the motor of the trolley need to have brakesProduction Effect Pictures for Roller Conv

1. Usually the Stainless Material Roller Conveyor System can be divided into strength and non-power curler traces in accordance to using mode.Power curler conveyor systemStandard energy curler tools can be divided into two types: retractable kind and constant type. Its fundamental shape involves casters, a rack, a roller, an electric powered manage box, and using equipment.Non-power curler conveyor systemSuitable for all bulk materials, small items, or uncommon objects that need to be positioned on pallets or switch boxes.

Production Instruction of Fully Automatic Reciprocating Screw Conveyor Belt Conveyor：1. Transmission direction: downward2. Conveyed product: solid bag3. Product size: subject to the customer's product size4. Product weight: 20, 40Kg (maximum)5. Demand capacity: 800bags/hStructure of Fully Automatic Reciprocating Screw Conveyor Belt Conveyor:1. The central frame is welded with carbon steel (5mm thickness). The external conveyor chain frame is installed from the top by the center frame to the bottom.2.

Processing requirements of 90 Degree Roller Turning Machine:Taper roll carbon steel galvanized, frame rectangular pipe sprayed;Technical note of 90 Degree Roller Turning Machine:1. SEW motor 1.1KW, 380V, 50HZ, 3P;2. Speed: 72m/min;3.

Introduction of spiral belt conveyor:1. Transmission direction: downward2. Conveyed product: solid bag3. Product size: subject to the customer's product size4. Product weight: 20, 40Kg (maximum)5. Demand capacity: 800bags/hStructure of spiral belt conveyor machines:1. The central body is welded with carbon metal (5mm thickness). The exterior conveyor chain body is mounted from the pinnacle via the core body to the bottom.2. The outer conveying body is made of 304 stainless metal with a thickness of 2.5mm.3.

Introduction to Belt Turning Conveyor:The turning belt conveyor can transport a extensive range of materials, which can transport a range of bulk materials, as properly as transport a range of small packing containers of items such as cartons and packaging bags. The shape of the turning belt conveyor has a forty five diploma turning belt conveyor, a ninety diploma turning belt conveyor, and a one hundred eighty diploma turning belt conveyor, which can meet the technical necessities of a number turning conveyance. The belt conveyor is geared up with PVC, PU and different materials.

Processing requirements of 90 degree roller turning machine:Cone roller carbon steel galvanized, frame rectangular pipe spraying;Technical Note:1.SEW motor 1.1KW, 380V, 50HZ, 3P;2. Speed: 72m/min;4. Quantity: 4 sets.2. Supply Range190 Drum Turning MachineTable4Contains the following equipment:1Rollerroot562Inner and outer platesset43Outriggerbranch124Pull rodbranch85Adjusting footindividual166Chain coverpiece47Motor platepiece48Sprocket wheelpiece49chainpiece5610SEW Reduction Motorset411partsset4 Working Conditions1.

Name:Top protection plate manipulatorFunction description: suction cover plate manipulator, suck the new cover plate from the side of the conveyor, put it on the top of the board to be packaged, the maximum size of the cover plate is 2830mm*2100mm*12mm, the thickness is 1-12mm (most of the 4-6mm), weight: 15-70kg, and the through-laminator and its conveyor are used in conjunction with the conveyor and its conveyor, and the conveying positioning is accurateUnique control logic and mechanical mechanism: can effectively avoid suction multiple sheets at one time, need to optimize the plan in detai

Intelligent Packing System  For Man Made Wood Boards Scheme Feature:1. The transfer conveyor requires stable conveying.

Non-woven Radial Packaging Machine Notes:Demand-side rewinder table height: 700mm (the height of the supplier's equipment drive roller from the ground needs to be designed to be 700mm);The rewinder to the winding machine rewinder is excessive, and the transport table is excessive, and the demander is responsible.Packaging Requirements:The number of winding turns can be setAutomatic reciprocating is possibleAfter each package roll, the film holder automatically returns to the fixed position.Other requirements:At the request of the demand side, after winding, it is necessary to discharge the

PE film has moisture resistance, small moisture permeability, is a blown film, thick texture, not easy to stretch and deform.Product Specification For PE capping films(More specification,please contact with us at any time):Width (mm): 300-2000Thickness (mm): 0.05-0.40Production process of PE film:Film blowing machine is a mechanical equipment that heats and melts plastic particles and then blows them into a film.